home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Sticker Works
/
Sticker Works.iso
/
ereg32
/
ereg32.ini
< prev
next >
Wrap
INI File
|
1998-04-03
|
2KB
|
60 lines
; TRANSLATORS - Only translate lines directly following
; a line that says "TO TRANSLATE"
[Product Identification]
product identification number = 29802
company = Broderbund Software
family =
product = Sticker Works
version = 1.0
[Main Window]
;TO TRANSLATE
Main Window Caption = Electronic Registration for Sticker Works (TM)
[EReg Dialog GUI]
Product Name = Sticker Works (TM)
Company Name = Br°derbund Software
questionnaire DLL = SuELUSAr.dll
no mail variant = 0
trial variant = 0
ROZ variant = 0
; This section allows you to over ride the transmission values
[Transmission]
; phone number the ereg client program calls
; to send customer registration information
Modem Phone Number = 18006154286
; status message level
; 0 = silent, 1 = terse, 2 = normal, 3 = verbose
;info level = 2
; number of times to dial the remote system
;connect attempts = 2
; number of seconds to wait for the modem to connect after dialing
; Husdawg default is 45, but that is too short a time
;connect time = 70
; number of the port to begin the search for a modem
; 1 = COM1, 2 = COM2, etc.
;port = 1
; baud rate to begin the search for the modem
;baud = 2400
; transmission protocol
; 2 = EREG, 10 = ASCII, 11 = ZMODEM, 12 = EXT1, 13 = EXT2
; currently, this field is ignored -- EREG is always used
;protocol = 2
; transmission block size
; 128 <= block size <= 2048
; Husdawg default is 200, but that is too small
;block size = 1024
; currently defined options (values can be ORed):
; 1 = NOSEARCH look for modem only on port passed in */
; 2 = SHAREIRQ search for modems on ports that might share IRQ
; 4 = PULSEDIAL pulse dialing
; 8 = BLINDDIAL blind dialing
;options = 0
;URL = http://ereg.broder.com